From yahoo Sent Tue, Oct 18th 2016, 07:22
> Hello Doepfer users, > > When setting up a patch with my A160-5 clockdivider I noticed > that when I send a CV to the multiplier input for creating > ratcheting there is a latency of one sequencer step. > To be clear: I made the patch classic. > > See example in the manual. > So one A155. > > The point is that I have to set the CV step on sequencer step, > let's say, 7 to get the ratcheting effect on step 8 in the sequence. > > Is this normal? > > Best regards > > Jacco Ville I just used the A-160-5 for a performance in Munic (DigitalAnalog Festival) and cannot confirm this behaviour. You should use the pre output of the A-155 to avoid any delay. If this does not help please contact Christian Assall (xxxxxxxx@xxxxxxx.xx). He programmed the A-160-5 firmware together with the A-155. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/