From yahoo Sent Mon, Sep 26th 2016, 09:07
From yahoo Sent Mon, Sep 26th 2016, 09:07
From the distance it's impossible to find out what's wrong. But the A-111 cannot be damaged by a "wrong" CV coming from the bus access module. It will withstand any CV in the range -12V...+12V and the bus access module cannot generate a voltage beyond these values. If you cannot find the fault please follow the repair notes on the FAQ page of our website: www.doepfer.com > English > FAQ > General > Repair procedure Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Montag, 26. September 2016 09:31 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] a111( high end vco with 3340) issue > > > > > > hi friends > > Yesterday my dear A111 stopped to work..., perhaps (i m not > totally sure) it was damaged by a wrong voltaje supplied by my > doepfer bus-Access module, which had a intermitent failure due > to a defective bus ribbon cable..( i know i don t need to use the > cv input because my bus board has the jumpers inside!) > > Where should I check ? Maybe CEM is dead? > > Maaaany thanks to everyone!! > > Kind regards from Spain > > Miguel ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/