From yahoo Sent Mon, Jun 1st 2015, 08:26
> Enter your vote today! A new poll has been created for the Doepfer_a100 group: > Should Doepfer start to make a simple buffered multiple with either 2hp width or 4hp widht? A dual 1in 3 out with the > ability to use the lower unit outputs with the upper units input. > Created by: marco.heimburger > Yes > No > + Add Options > > > Thanks! Thank you for the poll. It should take not longer than 1-2 hours to "design" this module (about 1 hour for the electronics and 1 hour for the front panel). The 4 HP version would be cheaper because all the electronics can be collected on one pcb (about the same price as the A-138u, i.e. ~ Euro 50). The 2 HP version requires 2 pcbs and would be a bit more expensive (~ Euro 60). Let's wait for the result of the poll. Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/