From yahoo Sent Wed, Apr 23rd 2014, 09:37
From yahoo Sent Wed, Apr 23rd 2014, 09:37
Hello Richard,
you find my answers written inline.
Best wishes
Dieter Doepfer
> Hi
>
>
> I just received an A-189-1 Bit Modifier module and the ribbon
> cable connecting JP2 to the mode dial has become disconnected in
> transit. Please can you confirm that...
>
>
> a) At the JP2 (PCB) end the red connector is towards the bottom
> of the module and...
> b) At the Mode dial end the red connector is towards the module's
> front panel.
yes (both). You see the polarity also in the picture of the module on our
website:
www.doepfer.com > PRODUCTS > A-100 > Module Overview > A-189-1
> Also I see there is an expansion port (JP4) on the PCB. What is
> this used for?
This port is not used so far. We simply connected unused port pins of the
microcontroller to this pin header.
> Thanks
>
>
> Richard Horsman
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/