From yahoo Sent Fri, Jun 13th 2014, 10:45
> I can solder and can modify electronic stuff safely, but only > with instructions I'm afraid. > > Oh well, I'll keep reading about circuits and I'll figure it out one day > > Cheers > > Dan Then simply connect one terminal of the 1k serial resistor to the output pin (VCO Out or VCF Out) and the second terminal to the tip terminal of the socket. GND has to be connected to the corresponding terminals of both sockets. You also find some instructions on the A-100 DIY page (www.doepfer.com > PRODUCTS > A-100 > DIY page) Hope this helps Best wishes Dieter Doepfer ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/