From yahoo Sent Tue, Apr 29th 2014, 07:53
From yahoo Sent Tue, Apr 29th 2014, 07:53
> YELP!
> Suddenly tonight, sitting down to make last patch before a gig on
> Saturday I get a bug on my A 155 sequencer.
>
>
> Heres the thing, Im getting step 1 then step 2 then sep 1 again
> then step 2 THEN step 7 and 8.. but with a double note beat on
> something...
>
> I HAVE NEVER had anything other than standard flashing thru the
> notes 1 to 8 before...
>
>
> Whats happening???
> mark
The steps are obviously addressed in the wrong way. I see two reasons for
this behaviour: a loose connector or defective integrated circuits. Look at
the connectors of the ribbon cable that leads from the small control board
(start, stop, step, reset) to the trigger/potentiometer boards. If the cable
and the connectors are OK probably one or more integrated circuits on the
control board or on the trigger/potentiometer boards are defective. As each
integrated circuit is equipped with a socket the circuits can be replaced
without soldering. If the module is still under warranty please return it
to the dealer where you purchased it.
Best wishes
Dieter Doepfer
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/