From sines Sent Sun, Mar 4th 2018, 00:40
Side note / thread hijack. Anyone have the lead on the 3-6x rotary switch that allows you to add = more sequence locations?=20 Sean McBride had his done this way, but I can=E2=80=99t find the info on = it.=20 Still on the search for Eurorack sequencers that do all of this, which = isn=E2=80=99t much, but does it so well. Todd > On Mar 3, 2018, at 7:34 PM, Kenny Balys <xxxxx@xxxxxxxx.xxx> wrote: >=20 >=20 > I am looking that the schematics of both and the CSQ-600 has 2 = kilobytes of sequencer RAM and the CSQ-100 has 512 bytes. This makes me = suspect that the CPU coding isn't going to be exactly the same. >=20 > But the switch matrix and surrounding logic looks the same! >=20 > So there is a step in socket on the 100 thus adding the STEP button is = just a diode and a pushbutton. >=20 > And the B.Step is a diode, pushbutton, NPN transistor (2SC945P or = 2SC1815GR) and 1 resistor. >=20 > Then I could finally add a rest!!!! >=20 > So this will work??? Thats pretty cool. >=20 > What about the portamento button? Did you implement that too? >=20 > Also, where did you put the buttons? On first glance, the front panel = bushings look would work as then no new holes need to be drilled. >=20 >=20 >=20 > On 03.03.18 20:42 , Florian Anwander wrote: > > I am replying public to this private email, because I think it = wasn't > > meant to be private. > > > > I haven't seen any info yet (and I don't remember from whom I got = this > > hint), but I once improvised the "step back" function and it worked. = So > > I assume that the info is correct. > > > > Florian > > > > On 03.03.18 20:51 , Kylee Kennedy wrote: > >> That's awesome is there any info out there on how to do those mods? > >> > >> Kylee > >> > >> On Saturday, March 3, 2018, Florian Anwander = <xxxxxxxxx@xxxx-xxxxxx.xx > >> <mailto:xxxxxxxxx@xxxx-xxxxxx.xx>> wrote: > >> > >> > >> BTW: did you know, that the CSQ-100 uses the same processor / > >> firmware as the CSQ-600. You only hav to add some transistors = and > >> pushbuttons, to get all the step programming possibilities of = the > >> CSQ-600. > >> > >