From yahoo Sent Mon, Jul 3rd 2017, 08:04
You may use this power supply. But the max. output current is then only 500mA. Please refer to the information on our website: www.doepfer.com > English > PRODUCTS > A-100 > DIY case kit: "to operate the kit an external transformer with 14-16V/2.4A AC is required, the current of the transformer has to be twice the value of the +/-12V DC current, the max. value is 2.4A (corresponding to 1200mA for +/-12V DC), even smaller current output is possible; the current output of the power supply is half the current of the external transformer as the currents for both voltages +/-12V are required (if e.g. the transformer outputs max. 1000mA the max. power supply current is 500mA for +/-12V)" Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Freitag, 23. Juni 2017 15:22 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] Re: A-100 LC3 PSU (?) > > > > > > Sorry I was wrong in the description of the problem, forget it. > > > My worry here concerns the fact that a (not original) 1000mA > transformer is used for a (supposed) 1200mA power supply. I say > supposed because I dont know whether this case came with a > lower supply mA value than todays model (the original Doepfer > transformer installed today delivers 2400mA). > > > So, the PSU and the board are original Doepfer, the external > transformer is not. > > > Do you think this might cause issues to the power supply, the > board or the modules? > > > The link describes the not original transformer.. > > > http://www.velleman.eu/products/view/?country=fr&lang=en&id=365838 > > > Since I already own this case with 1200mA and the original ext. > transformer (2400mA), would be technically possible to use this > original transformer for both cases at the same time? > > > Best, > dxx > > > > > > > Il giorno 18 giu 2017, alle ore 22:47, Diego Ragnini > <xxxxxxx@xxxx.xx> ha scritto: > > > Hi everybody > > > A guy sells a second hand 2,5 years old A-100 LC3 of 1000mA, with > a PSU which is not the original one. Apparently it had few issues > and decided to replace it for not clearly specified reasons. He > forwarded me the link for this PSU > > > http://www.velleman.eu/products/view/?country=fr&lang=en&id=365838 > > > I would be glad if someone could confirm the compatibility with > the Doepfer system. He states that everything works flawlessly > with it. I am surprised to know about issues on the original > transformer for this unit, which I own in the new version > (1200mA) and cannot find anything to complain about its PSU, > absolutely sturdy and reliable. > > > Best regards, > Diego > > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/