From yahoo Sent Wed, Aug 2nd 2017, 11:58
At this pin header the inverted output signal is available for DIY applications (upper pin = inverted output, lower pin = GND). While we're at DIY: in addition a single pin is available for each input socket (next to the socket in question) for internal normalling of the inputs. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Mittwoch, 2. August 2017 12:27 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] A-138b inverted output mod > > > > > > Hi All > > > Looking at the jumper PDF there is a pin dedicated to "inverted > sum output". I'm handy with a soldering iron but no good with > schematics. I read a post on muffwiggler were someone mentioned > they modded theres but didn't give details and it was a post from > 4 years ago. > > > Anyone know how to add/mod an extra inverted output socket? > > > Thanks > Alan > > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/