From Kenny Balys Sent Wed, Nov 28th 2018, 14:06
From Kenny Balys Sent Wed, Nov 28th 2018, 14:06
They could also try "Roland Mode" where the JP6 tries to behave as though Europa were not installed. Hold "TAPE" button down on power up. This might help narrow down the problem. I have not had this problem with a JP6 but I have had it with an Emax and the cause was exactly what Florian suggested. A MIDI loop. Best wishes, ./k On 28.11.18 14:02 , Florian Anwander wrote: > Am 28.11.2018 um 14:59 schrieb Peter Forrest: >> >> I’ve had this report about the JP-6 with Europa we sold in the last auction:- >> >> I finally got to use the JP6 in a session at the weekend and consistently had >> Midi problems which rendered it useless for external control. I have been >> through the manual to determine what the possible problem is and cannot find >> anything related. The Midi behaves fine after boot up but either freezes or >> stops working completely when it recieves something other than Midi note >> information, i.e. patch change, arpeggiator etc. The Keyboard still works fine >> locally but has to be powered off and on again to regain Midi. >> > > Hello Peter, > > this sounds like your customer is causing a MIDI Loop. Ask him whether he uses > MIDI In and MIDI Out at the same time. > > Florian >