From Oakley Sound via analogue Sent Wed, Sep 26th 2018, 09:12
> Very nice! Thanks Brian. It would have been even nicer if I hadn't have cut the primary wires on the 18V transformer so short I had to add an extra terminal block to extend them. Doh! http://www.muffwiggler.com/forum/userpix2/650_wp_20180605_16_06_51_pro_1.jpg The photo doesn't show the finished unit. I have since added the Oberheim Interface circuitry back and fitted a nice new DB37 connector to the rear. I also upgraded the power supply wiring to the motherboard and CPU board from the PSU. The wires that Oberheim used were very thin creating a very noisy 25mV drop across the ones to the CPU board. Upping them to 24/0.2 dropped that to less than 3mV which substantially reduced the noise on the 0V on the CPU board. Did it make an audible difference? Who knows, but it makes me happier. Tony www.oakleysound.com