From yahoo Sent Thu, Nov 24th 2016, 11:34
From yahoo Sent Thu, Nov 24th 2016, 11:34
You find a detailed explanation of the CV/Gate bus principles on our
website:
www.doepfer.com > PRODUCTS > A-100 > Technical details > Power Supply and
System Bus
The A-143-1 does not pick up the gate signal from the bus.
Best wishes
Dieter Doepfer
> Hello,
>
> I purchased an A-190-3 and getting confused a bit for the cv/gate
> bus jumpers option, as I already own a A-190-4.
>
> Will I have to care of keeping/removing the concerned jumpers
> even though the two interfaces will be mounted on different rows
> within the A-100P9 case?
>
> And does the A-143-1 receive gates from the bus if the A-190-3
> jumpers are left mounted as coming from the retailer?
>
> Moreover, Doepfer web page doesn't mention the A-190-4, but since
> it is descending from A-190-1 I think it might be concerned:
> Important notes:
> The module comes with installed bus jumpers for CV and Gate. One
> has to remove the jumpers if e.g. an A-164, A-190-1, A-190-2,
> A-185-1 or A-185-2 is already connected to the CV and/or gate
> lines of the same bus board!
>
> Best, Diego
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/