From yahoo Sent Mon, Sep 14th 2015, 10:06
From yahoo Sent Mon, Sep 14th 2015, 10:06
> I remember reading somewhere that there was a conflict with having this pair of modules on the same bus board but I can't
> remember what it is and can't seem to find it now that I got a hold of an A-191. Before I start moving multiple modules
> around to create a second +5V rail, I wanted to check with the group. I have the +5V low cost adapter which at 100mA
> should cover both and plenty of +/-12V (PS2)
>
> Is there perhaps a conflict of both being on the CV/Gate bus at the same time? If so, are there any easy fixes? e.g.
> altering the cable or removing the jumpers for the CV/Gate? Looking to know my options here so I can add them to my
> system planning rule list. Does this conflict exist if I'm only using the A-191 in Shepard Generator mode (my intent for
> the module)?
>
> I'm also curious if the module actually uses the +5V in in Shepard Generator Mode or just MIDI mode?
I do not remember that there was a conflict (the module is out of production since 15 years).
The +5V were necessary in any case to run the microcontroller.
Best wishes
Dieter Doepfer
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/