From yahoo Sent Wed, Jan 2nd 2019, 13:18
From yahoo Sent Wed, Jan 2nd 2019, 13:18
Hello, please make sure that the output level of the Gate/Clock/Reset/Start/Stop outputs is set to +12V (not +5V). And make sure that the frequency of the A-147-2 is not too low. The frequency of the A-147-2 should be not much less than the clock signal coming from the Dark Time. Otherwise the period of the A-147-2 is to low to generate a noticeable signal before the next reset appears. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Dienstag, 25. Dezember 2018 19:52 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: [Doepfer_a100] A147-2 VCDLFO question > > > Hello and happy christmas to everyone, > > I am using an external clock e.g from dark time to sync/reset the A147-2, > as soon as I am increasing the frequency knob of the lfo, the > outputs are in perfect > sync with the external clock. As soon as I am decreasing the > frequency knob I have no > output signal from the lfo, the leds are not blinking. Is it a > normal behaviour? > > > Best regards, > Miltos ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/