From yahoo Sent Fri, Feb 21st 2014, 09:00
> Dieter, thanks for your reply. I tried connecting the CV1 output > at the rear panel to the VCO F > socket at the front panel as you recommended. There still is no > pitch change. > > > So, it sounds like I need to get the MIDI-to-CV interface > repaired. Is it ok to have it repaired locally? > > > Thanks, > Mike Please contact the dealer where you have purchased the unit. But I suppose that they will send the unit to Germany for repair or replace the complete supply/interface board. It's a very unusual fault and I cannot remember that we had ever a similar problem in the past. Sounds like a defective DA converter or DAC reference or processor or .... ? Best wishes Dieter Doepfer ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: http://info.yahoo.com/legal/us/yahoo/utos/terms/