Re: [Doepfer_a100] MCV-24 trigger output?

From Florian Anwander
Sent Thu, Jun 2nd 2016, 10:09

Am 02.06.2016 um 11:55 schrieb Zoƫ Blade xxx@xxxxxxxxx.xx.xx [Doepfer_a100]:
> So I was hoping to get it to output short trigger bursts in addition to one long, uninterrupted gate, for all the overlapping notes.

You'd need an additional output for this. The trigger bursts are not on 
top of the gate.

A gate represents a status
A trigger represents a timestamp

These are two different things, which need different signal pathes.



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Doepfer_a100/join
    (Yahoo! ID required)

<*> To change settings via email:
    xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx 
    xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> To unsubscribe from this group, send an email to:
    xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/