From alt-mode Sent Sun, Jul 24th 2005, 03:48
Peter, I didn't mean to imply that the tracking was limited to 4 octaves! That was all I had available on my controller at the time. I haven't had a chance to test further. I'm sure the range is much greater. OK, now I understand where the sync is going. It is OK for it to be different, it just wasn't what I was expecting. Actually, having something that sounds a bit different is a nice change. I have hard sync from the Doepfer and ASys oscillators in my system. Regarding the power connection, Doepfer has a convention that -12V is always the lowest set of pins on the connector when you look at a module. The "red line" of the power cable is always oriented down. The Plan B has the -12V as the highest set of pins on the connector so the "red line" is on top but the cable needs to be twisted to put the "red line" down when it connects to the bus board. Not a problem, just different. I'll try to do some comparisons with the Buchla Music Easel VCOs. I actually have a bunch of Easel samples recorded that I need to put up for folks to get a better idea of what it sounds like. Eric