From sam Sent Sun, Feb 17th 2019, 22:30
From sam Sent Sun, Feb 17th 2019, 22:30
The HR-16 uses a power adapter with a normal barrel-style plug - it's = not an audio-style mini jack. (The Moog Rogue uses that odd set-up.). = The connector in the drum machine has a 2.5mm pin that fits into the = barrel plug. Sam Mims Syntaur > On Feb 17, 2019, at 4:14 PM, Brian Willoughby = <xxxxxx@xxxxxxxxxxxx.xxx> wrote: >=20 > What is the current rating for the 9VAC adaptor? >=20 > It=E2=80=99s easy enough to solder a 3mm jack to a 9VAC adaptor, but = if it can=E2=80=99t handle the current draw of an HR16 then you=E2=80=99ll= have troubles. It=E2=80=99s fine to be overrated, although that will = probably cost more, but you can=E2=80=99t go below. >=20 > Also, with AC adaptors, there=E2=80=99s often a wide range in actual = voltage versus measured voltage. Not sure what to do about that unless = someone has an HR16 supply they can measure with a known (Fluke 87 RMS) = meter. >=20 > Brian >=20 >=20 > On Feb 17, 2019, at 11:55 AM, Mike Perkowitz <xxxx@xxxxxxxxx.xxx> = wrote: >> I just rescued an HR16 from ignominy, but the poor thing has no = power. It's got one of those hard-to-find 9VAC adapters with the 3mm = (1/8") audio-style connector. Before I order one online (and hope it's = what it claims to be), anyone have an extra they don't need any more and = want to sell? >>=20 >=20 >=20