From yahoo Sent Tue, Mar 15th 2016, 10:18
From yahoo Sent Tue, Mar 15th 2016, 10:18
Yes, this circuit should work. But I'd reduce the value of the potentiometers a bit (e.g. 10k) to obtain a more linear control behaviour. A 100k potentiometer with a 100k load (typical load value) has a very non-linear control scale. With a 10k pot that's much better. Of course the best solution would be a buffer for each potentiometer output but that's probably a bit over the top. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: xxxxxxx_xxxx@xxxxxxxxxxx.xxx [mailto:xxxxxxx_xxxx@xxxxxxxxxxx.xxx] > Gesendet: Montag, 14. März 2016 21:33 > An: xxxxxxx_xxxx@xxxxxxxxxxx.xxx > Betreff: Re: AW: [Doepfer_a100] DIY cv out module to accompany A152 > question > > > > > Dear Dieter (and all), > > > Many thanks for taking the time to reply to me! > > > Further to your advice could you (or anyone else) tell me if this circuit I have drawn will work using an LM7808 8v > voltage limiter? > > > https://dl.dropboxusercontent.com/u/536105/8x8v%20CV.jpg > > > (I have only drawn 4x CV outs on it) > > > Best wishes, > > > Neal > > > PS Dieter I cannot thank you enough for your A100 Eurorack system it has always been my dream to own my own modular > synthesiser and because of your designs, I can...! :) > > > > ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Doepfer_a100/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Doepfer_a100/join (Yahoo! ID required) <*> To change settings via email: xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx <*> To unsubscribe from this group, send an email to: xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/