From yahoo Sent Wed, Apr 5th 2017, 15:02
From yahoo Sent Wed, Apr 5th 2017, 15:02
> Hi,
>
> My modular is currently spread across 2 frames (an LC9 and a G6)
> that have a couple of meters gap between them. I intend to get a
> single large frame when I can afford it but, in the meantime, I
> need to figure out the best way to distribute clock signals
> between the frames. Currently, Im using passive mults to
> distribute clocks within each frame, with a suitable long cable
> joining a mult on one frame to a mult on another. Ive used the
> best quality cable I could get, as I appreciate losses happening
> over long connections and I dont seem to be having any issues at
> the moment, but would I be better using buffered mults for
> handling clocks?
>
> Best wishes.
>
> Tim Burgess
After all It depends upon the output of the clock transmitter and the inputs
of the clock receivers (levels, impedance/load). I never discovered any
problem with clock signals generated e.g. by one of our midi interfaces or
an LFO as clock source, even over longer distances (e.g. three cables
A-100C200 connected via passive multiples) and more than only one receiver.
But it's certainly not a bad idea to use buffered multiples to be on the
safe side.
Best wishes
Dieter Doepfer
P.S. We will show a multicore module at the Superbooth in Berlin that can be
used to connect up to 12 control signals with one standard multiwire cable
between two cases. It has been suggested by several customers who play live
on stage with two or more cases as it simplifies the pre-patching.
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
xxxxxxx_xxxx-xxxxxx@xxxxxxxxxxx.xxx
xxxxxxx_xxxx-xxxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> To unsubscribe from this group, send an email to:
xxxxxxx_xxxx-xxxxxxxxxxx@xxxxxxxxxxx.xxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/