Re: [AH] software/hardware CV/midi analogue sequencer advice sought

From Theo
Sent Tue, Jan 4th 2005, 20:05

Did you take a look at the Manikin electronics Schrittmacher?
Basically its 4 step sequencers playing 8 mono-phonic patterns, a total of
32 patterns.
And there are 32 midi channels available to match, for CV it needs a midi/CV
converter.
The 4 'sequencers' follow a master clock, but can have their own time
division.
Editing is quick and can be done during playback, push knob to select step,
turn knob to change value.
Note number, velo, duration and additional midi controllers for each step.

BTW This Manikin is almost but not the same as Manikin Records and yes Herr
Schulze uses Schrittmacher too.

Theo


----- Original Message -----
From: RMC <RMC@richardcraven.plus.com>
To: <analogue@hyperreal.org>
Sent: Tuesday, January 04, 2005 7:25 PM
Subject: [AH] software/hardware CV/midi analogue sequencer advice sought


> Hello All
>
> I think this is on-topic, but please flame and forgive if I'm wrong ...
>
> I have had many useful answers to my earlier sequencer poser ( 31/12/04,
Q:
> how to achieve this effect ... ?) and I thank you for those responses.  I
> have been looking at the P3 hardware sequencer, the Milton and the PSIM.
>
> What I want to find is a software program (that runs on a windows PC
> ideally), which works like this:
>
> 1) Allows you to program notes or note ranges into the pattern sequencer
> software along with gate on/off info
>
> 2) reads a MIDI control surface (set of knobs or sliders such as the
> Evolution UC33 or Doepfer pocket bank etc)
>
> 3) outputs MIDI data to a midi-to-cv convertor
>
> In this way, I would be able to use my control surface as the "analogue"
> input to the program and use the output on my MIDI synthesizer as well as
my
> Korg MS synths. That would help keep costs down and make best use of what
I
> already have.
>
> Quantisation etc. would be dealt with in the software.
>
> I have some limited experience with softsynths but I don't know enough
about
> them to understand my own question!  Can anyone here with more knowledge
> (and that *is* anyone ) tell me if I'm barking up the wrong tree, or is
> there software to suit my goal?
>
> cheers
>
> RMC, England
>