RE: [AH] 1/4-1/8 adapters

From Brett Maddaford
Sent Wed, May 14th 2008, 03:38

Hi drew

I have found alot of adapters to be a pain, quite a few I have have bad
connections etc. Have you considered using a blank panel and mounting both
1\4 and 1\8 jacks and wiring them ?

-----Original Message-----
From: Mark Pulver [] 
Sent: Wednesday, 14 May 2008 11:13 
To: AH
Subject: Re: [AH] 1/4-1/8 adapters

A few options here:

Specifically, $1 each for 10 or more:

drew (06:06 PM 5/13/2008) wrote:
 > 	Looking for recommendations of 1/4" to 1/8" adapters (to go
 >between modules.)
 > 	I have and use both the Q122 and Doepfer A-181 but I
 >figured there might be something that looks like this (except "mono"/TS
 >and probably cheaper in bulk, I'd want 10-20 of em):
 > 	Any suggestions?
 >Drew -
 >The content of this email is intended for the recipient ONLY and may not
 >be reproduced in any form without express written consent.

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error
please delete the e-mail & notify the system manager.
We reserve the right to scan all e-mail traffic for restricted content
and to monitor all e-mail traffic in general.
The views and opinions expressed in this e-mail are those of the sender 
and do not necessarily reflect the views of the organisation
by whom they are employed, except where the sender expressly
and with authority states them to be so.
This footnote also confirms that this email message
has been checked for the presence of computer viruses and script.
We believe but do not warrant that this e-mail is free from viruses.
Responsibility for virus checking rests entirely with the recipient.