Re: [AH] New Doepfer modules

From Gert Jalass
Sent Sun, Oct 19th 2003, 17:24

Bill,

CV-wise everything is fine. Audio signals may be an issue because most of
the signal generating modules have higher output levels than Moog.

Supply Voltages being more a problem because Doepfer does recommend +/- 12V
and some of their modules don't like +/- 15V at all.

In case of a 909/910 power supply an additional power supply will be needed.
No problem if the Moog does have a 930. Just some "step-down" regulator will
be needed to fullfill the -12V needs.

Gert

----- Original Message ----- 
From: "Bill Sautter" <sautter@comcast.net>
To: <analogue@hyperreal.org>
Sent: Sunday, October 19, 2003 4:52 PM
Subject: Re: [AH] New Doepfer modules


> They have some very cool modules.
> I don't know too much about Doepfer. Are the compatible with Moog CV-wise?
> (In other words, could I stick a Doepfer module in a Moog modular system
> and have it plug & play?
>
>
> At 09:52 am 10/18/2003, you wrote:
> >Looks like Dieter and the gang have been busy.  Some pretty exotic
> >modules are on the way:
> >
> >A-101-1 Vactrol Multitype Filter
> >http://www.doepfer.de/A1011.htm
> >
> >A-107 Multitype Morphing Filter
> >http://www.doepfer.de/A107.htm
> >
> >A-149-1 Quantized/Stored Random Voltages
> >http://www.doepfer.de/A1491.htm
> >
> >A-149-2 Digital Random Voltages
> >http://www.doepfer.de/A1492.htm
> >
> >A-154 Sequencer Controller
> >http://www.doepfer.de/A154.htm
> >
> >A-196 Phase Locked Loop (PLL)
> >http://www.doepfer.de/A196.htm
> >
> >A-197 Voltage Meter
> >http://www.doepfer.de/A197.htm
> >
> >Regards,
> >
> >Paul
>
> Regards,
> Bill
> Bill Sautter
> E-Mail: sautter@comcast.net
>