Re: [AH] Subject: PNW Synth Meeting

From James Husted
Sent Thu, Oct 23rd 2008, 18:33

I will have my doepfer rig there and there are a few blank panels  
that can be removed for you.

-James

On Oct 23, 2008, at 7:53 AM, flightofharmony wrote:

> I'm hoping that someone will bring a Eurorack modular with 8 or 16  
> hp left
> free :) I'm going to bring some Plague Bearer modules for people to  
> play
> with.
>
> ~flight
> redacted@example.com
> http://www.flightofharmony.com
>
>
> -> -----Original Message-----
> -> From: Paul Tillotson [mailto:redacted@example.com]
> -> Sent: Wednesday, October 22, 2008 9:38 PM
> -> To: Lorne Hammond; redacted@example.com
> -> Subject: Re: [AH] Subject: PNW Synth Meeting
> ->
> ->   I'm in the Seattle area, have a 147 combo preamp, but am not  
> sure if
> I'm
> -> going. That makes this probably not a helpful post.
> ->  What would I bring? A pair of 2600s with a mini sequencer and  
> an ARP
> -> sequencer and a SEM on the side? Probably would need to add a  
> 606 or 808
> to
> -> make it more interesting and might be able to skip a mixer, amp and
> -> speakers. A rev 2 Prophet could clear a room, someone would  
> probably
> provide
> -> a JP8, the Quadra's not working, the Chroma's big and not  
> immediately
> -> flashy. A stack of MKS 80s, 70s, 50s, 30s and 7s with  
> programmers would
> be
> -> fun but sounds like a lot of work...How about my "new" Yamaha 415
> electone
> -> organ with the mono synth with the wacky keyboard wiggling side  
> to side
> -> modulation? I'd need a van with a lift gate. It's all too hard to
> -> contemplate.
> ->    PT
> -> ----- Original Message -----
> -> From: "Lorne Hammond" <redacted@example.com>
> -> To: <redacted@example.com>
> -> Sent: Wednesday, October 22, 2008 5:43 PM
> -> Subject: [AH] Subject: PNW Synth Meeting
> ->
> ->
> -> > anyone have a polycom board for s1 1st left slot on the middle  
> board?
> i
> -> > don't understand polycom boards, are the resistors for  
> balancing to the
> -> > specific note or is it just that the chips need to be balanced  
> out?
> -> >
> -> > Next, anyone have a Leslie combo preamp for a 147 and going to  
> Renton?
> -> >
> -> > Also anyone going to Renton need any Keyboard Magazines I have  
> cases of
> -> > duplicates, room too crwowded. So tell me now.
> -> >
> -> > Anyone going to Renton want a yamaha MD-8 with a bad drive for  
> parts?
> -> > Mixerworks, nice fluoro display etc.  Free in person at Renton  
> only.
> -> >
> -> > Lorne in Canada
>
>