Re: [AH] Korg DSM-1 16 analog voices and 16 outs wow!!!!

From David Bulog
Sent Sun, May 26th 2013, 21:14

--Apple-Mail=_1C660453-EC7C-489D-8F7A-ED7520FFF313
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=iso-8859-1

There is a really nice example on Ebay --only $269  buy now + =
international shipping
That seller is really good with packaging too
snap it up--enjoy

http://www.ebay.com/itm/190846246593



On 21/05/2013, at 6:40 AM, David Bulog wrote:

> well the exciting news is an upgrade is being developed and new OS =
will be sure to fix the indiv outputs
>=20
> quote
>=20
> res pin is pin 4 you need to cut the tracks on both sides of pcb as =
some are connected both sides tide to ground giving there res pin ov no =
res
> =20
> you then have to solder a 100ohm current limiting resistor
> =20
> and then you need to find a cv source max 7v the cv dac would be the =
best place for this i used the doepfer 5v midi to 16 5vcv
> =20
> then you will need a pot 10k linear you connect this to
> =20
> the cv source ground and the wiper to the 100ohm resistor you =
connected to ther res pin
> =20
> now you can change the res easily
> =20
> but because its a rack its best to use the doepfer unit as you can =
control it via midi
> =20
> you can also do a matrix12 pole mixing giving 15 types of filter
> =20
> this requires a new daughter board to be made that will sit in
> =20
> sockets like toms digi boards no pcb cutting will be required as it =
will be done on the daughter board
> =20
> but tom is working on new upgrades for the dsm1 to bring it to the =
same spec as the dss1-x
> =20
> and im designing the filter board as it would be best to get both done =
at the same time
>=20
>=20
>=20
> On 21/05/2013, at 5:23 AM, Andrew Scheidler wrote:
>=20
>> The Roland S-550 is a pretty good sampler for percussion (from =
analogue synths of course!).  There are 8 assignable outs and a LP / HP =
/ BP filter with res that sounds pretty good for digital.  Crunchy 12 =
bit sound :-)
>>=20
>> Drew
>>=20
>> On Monday, May 20, 2013, Nick Zampiello wrote:
>> i was wondering about this output assignment mapping as well.
>>=20
>> the Casio FZ samplers did the same thing.
>>=20
>> round robbin of the outputs rendering all that hardware useless =
except for the one time you need that trick.
>>=20
>> Kurzweil samplers had 6 outs ( i believe configured as 3 stereo pairs =
) that you could really assign the outputs of specific samples.
>>=20
>> 6 isn't 8 but it's not 2 either!
>>=20
>> after googling i found this:
>>=20
>> http://www.sweetwater.com/k2000/qanda.html
>>=20
>> OUTPUTS: The keyboard has 4 separate audio outputs plus the stereo =
master pair; the rack has 8 separate audio outputs plus the stereo =
master pair.
>> SAMPLE INPUTS: The rack has a pair of balanced XLR sample inputs.
>> SCSI BUSS: The rack has a second SCSI buss connector (acting as a =
SCSI through), allowing multiple K2000R's to share the same hard drive.
>> INTERNAL HARD DRIVE: The keyboard can house a 540Mb internal hard =
drive; the rack can house a 1 Gig.
>> DAC's: The rack contains two more stereo high quality DAC's (digital =
to audio converters) than the keyboard for the additional audio outputs.
>> STEREO OUTPUTS/AUDIO JACKS: The rack contains 4 more stereo audio =
jacks than the keyboard (to allow the outputs to double as inserts).
>> FAN KIT: The basic keyboard does not contain a fan kit; the rack (and =
the units with the sampling option already added) comes standard with =
the fan kit.
>> PRICE: The cost between the two differs by only $100.00 retail =
because the cost of the K2000's enclosure and keyboard are relatively =
inexpensive, and the rack contains the above features not included on =
the keyboard.
>>=20
>> z
>>=20
>>=20
>> =20
>> NEW ALLIANCE EAST!!!!
>>=20
>> --------------------------------------
>>=20
>> New Alliance East - Mastering
>>=20
>> New Alliance East - Facebook
>>=20
>> X :::: B :::: S
>>=20
>>=20
>>=20
>> From: Grant Headquarters <jggrant@melbpc.org.au>
>> To: analogue@hyperreal.org=20
>> Sent: Monday, May 20, 2013 8:46 AM
>> Subject: [AH] Korg DSM-1 16 analog voices and 16 outs wow!!!!
>>=20
>>=20
>> If you thought you could have, for example, kick on 1 output, snare =
on another, etc.,  you'll be sadly disappointed.   Unfortunately, =
there's no way to properly assign voices.  Individual voices cycle =
through the multiple outputs, making them, in effect, useless.   You can =
really only use it with the main (mono) output.  =20
>>=20
>> [Well, Korg hadn't had a lot of experience with samplers.   One of =
the things people said about the earlier DSS-1 was "it would be cool =
with multiple outputs".  So they did it ....!]
>>=20
>>=20
>> jg::
>>=20
>>=20
>> > Hi I have a few questions on
>>  Korg DSM-1 rackmount sampler ---16 analog voices and 16 outs
>>=20
>>=20
>=20


--Apple-Mail=_1C660453-EC7C-489D-8F7A-ED7520FFF313
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
	charset=iso-8859-1

<html><head></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">There =
is a really nice example on Ebay --only $269 &nbsp;buy now + =
international shipping<div>That seller is really good with packaging =
too<br><div>snap it up--enjoy</div><div><br></div><div><a =
href=3D"http://www.ebay.com/itm/190846246593">http://www.ebay.com/itm/1908=
46246593</a></div><div><br></div><div><br></div><div><br><div><div>On =
21/05/2013, at 6:40 AM, David Bulog wrote:</div><br =
class=3D"Apple-interchange-newline"><blockquote type=3D"cite"><div =
style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; =
-webkit-line-break: after-white-space; ">well the exciting news is an =
upgrade is being developed and new OS will be sure to fix the indiv =
outputs<div><br></div><div>quote</div><div><br></div><div><table =
class=3D"ygrp-tabbed-container" cellspacing=3D"0" cellpadding=3D"0" =
style=3D"font-size: inherit; width: 845px; border-top-width: 1px; =
border-right-width: 1px; border-bottom-width: 1px; border-left-width: =
1px; border-top-style: solid; border-right-style: solid; =
border-bottom-style: solid; border-left-style: solid; border-top-color: =
rgb(178, 178, 178); border-right-color: rgb(178, 178, 178); =
border-bottom-color: rgb(178, 178, 178); border-left-color: rgb(178, =
178, 178); background-color: rgb(247, 247, 247); margin-top: 0px; =
margin-right: 0px; margin-bottom: 0px; margin-left: 0px; height: 754px; =
font-family: arial, helvetica, clean, sans-serif; =
-webkit-border-horizontal-spacing: 2px; -webkit-border-vertical-spacing: =
2px; "><tbody><tr style=3D"background-color: rgb(255, 255, 255); "><td =
class=3D"msg content user first" style=3D"vertical-align: top; =
font-family: Georgia; border-top-width: 1px; border-right-width: 0px =
!important; border-bottom-width: 0px !important; border-left-width: 0px =
!important; border-style: initial !important; border-color: initial =
!important; border-top-style: solid; border-top-color: rgb(123, 158, =
189); "><div class=3D"msgarea entry-content" style=3D"padding-top: 0px; =
padding-right: 4px; padding-bottom: 0px; padding-left: 4px; margin-top: =
15px; margin-right: 15px; margin-bottom: 15px; margin-left: 15px; "><div =
style=3D"clear: none; "><font size=3D"2" face=3D"Arial">res pin is pin 4 =
you need to cut the tracks on both sides of pcb as some are connected =
both sides tide to ground giving there res pin ov no =
res</font></div><div style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">you then have to solder a 100ohm current =
limiting resistor</font></div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; =
"><font size=3D"2" face=3D"Arial">and then you need to find a cv source =
max 7v the cv dac would be the best place for this i used the doepfer 5v =
midi to 16 5vcv</font></div><div style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">then you will need a pot 10k linear you =
connect this to</font></div><div style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">the cv source ground and the wiper to the =
100ohm resistor you connected to ther res pin</font></div><div =
style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">now you can change the res =
easily</font></div><div style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">but because its a rack its best to use the =
doepfer unit as you can control it via midi</font></div><div =
style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">you can also do a matrix12 pole mixing giving =
15 types of filter</font></div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; =
"><font size=3D"2" face=3D"Arial">this requires a new daughter board to =
be made that will sit in</font></div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; =
"><font size=3D"2" face=3D"Arial">sockets like toms digi boards no pcb =
cutting will be required as it will be done on the daughter =
board</font></div><div style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">but tom is working on new upgrades for the =
dsm1 to bring it to the same spec as the dss1-x</font></div><div =
style=3D"clear: none; "><font size=3D"2" =
face=3D"Arial"></font>&nbsp;</div><div style=3D"clear: none; "><font =
size=3D"2" face=3D"Arial">and im designing the filter board as it would =
be best to get both done at the same =
time</font></div></div></td></tr></tbody></table><div><br></div><div><br><=
/div><div><br></div><div><div>On 21/05/2013, at 5:23 AM, Andrew =
Scheidler wrote:</div><br class=3D"Apple-interchange-newline"><blockquote =
type=3D"cite">The Roland S-550 is a pretty good sampler for percussion =
(from analogue synths of course!). &nbsp;There are 8 assignable outs and =
a LP / HP / BP filter with res that sounds pretty good for digital. =
&nbsp;Crunchy 12 bit sound :-)<div>
<br></div><div>Drew<span></span><br><br>On Monday, May 20, 2013, Nick =
Zampiello  wrote:<br><blockquote class=3D"gmail_quote" style=3D"margin:0 =
0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div =
style=3D"font-size:10pt;font-family:verdana,helvetica,sans-serif">
<div =
style=3D"font-family:verdana,helvetica,sans-serif;font-size:10pt"><span>i =
was wondering about this output assignment mapping as =
well.</span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><br></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span>the Casio =
FZ samplers did the same thing.</span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><br></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span>round =
robbin of the outputs rendering all that hardware useless except for the =
one time you need that trick.</span></div>
<div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span><br></span></=
div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span>Kurzweil samplers had 6 outs ( i believe configured as 3 stereo =
pairs ) that you could really assign the outputs of specific =
samples.</span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><br></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span>6 isn't 8 =
but it's not 2 either!</span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><br></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span>after =
googling i found this:</span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><br></span></div><div =
style=3D"background-color:transparent"><span><font><a =
href=3D"http://www.sweetwater.com/k2000/qanda.html" =
target=3D"_blank">http://www.sweetwater.com/k2000/qanda.html</a></font><br=
></span></div><div =
style=3D"font-style:normal;font-size:15.555556297302246px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><font><br></font></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span><table =
width=3D"100%" border=3D"0" cellspacing=3D"0" cellpadding=3D"1" =
style=3D"font-family:Arial,Helvetica,sans-serif;color:rgb(51,51,51);font-s=
ize:12px">
<tbody><tr valign=3D"top" style=3D"font-size:12px"><td =
width=3D"78%"><strong>OUTPUTS:</strong>&nbsp;The keyboard has 4 separate =
audio outputs plus the stereo master pair; the rack has 8 separate audio =
outputs plus the stereo master pair.</td>
</tr><tr valign=3D"top" style=3D"font-size:12px"><td><strong>SAMPLE =
INPUTS:</strong>&nbsp;The rack has a pair of balanced XLR sample =
inputs.</td></tr><tr valign=3D"top" =
style=3D"font-size:12px"><td><strong>SCSI BUSS:</strong>&nbsp;The rack =
has a
 second SCSI buss connector (acting as a SCSI through), allowing =
multiple K2000R's to share the same hard drive.</td></tr><tr =
valign=3D"top" style=3D"font-size:12px"><td><strong>INTERNAL HARD =
DRIVE:</strong>&nbsp;The keyboard can house a 540Mb internal hard drive; =
the rack can house a 1 Gig.</td>
</tr><tr valign=3D"top" =
style=3D"font-size:12px"><td><strong>DAC's:</strong>&nbsp;The rack =
contains two more stereo high quality DAC's (digital to audio =
converters) than the keyboard for the additional audio =
outputs.</td></tr>
<tr valign=3D"top" style=3D"font-size:12px"><td><strong>STEREO =
OUTPUTS/AUDIO JACKS:</strong>&nbsp;The rack contains 4 more stereo audio =
jacks than the keyboard (to allow the outputs to double as =
inserts).</td></tr><tr valign=3D"top" style=3D"font-size:12px">
<td><strong>FAN KIT:</strong>&nbsp;The basic keyboard does not contain a =
fan kit; the rack (and the units with the sampling option
 already added) comes standard with the fan kit.</td></tr><tr =
valign=3D"top" =
style=3D"font-size:12px"><td><strong>PRICE:</strong>&nbsp;The cost =
between the two differs by only $100.00 retail because the cost of the =
K2000's enclosure and keyboard are relatively inexpensive, and the rack =
contains the above features not included on the keyboard.<br>
<br></td></tr></tbody></table></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span>z</span></div=
><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif">
<span><br></span></div><div =
style=3D"font-style:normal;font-size:13.333333969116211px;background-color=
:transparent;font-family:verdana,helvetica,sans-serif"><span><br></span></=
div><div =
style=3D"font-family:verdana,helvetica,sans-serif;font-size:10pt">
</div><div =
style=3D"font-family:verdana,helvetica,sans-serif;font-size:10pt">&nbsp;</=
div><div =
style=3D"font-family:verdana,helvetica,sans-serif;font-size:10pt"><span =
style=3D"color:rgb(96,0,191)">NEW ALLIANCE EAST!!!!</span><br><br>
--------------------------------------<br><br><div><a rel=3D"nofollow" =
href=3D"http://newallianceeast.com/" target=3D"_blank"><b>New Alliance =
East</b>&nbsp;- Mastering</a></div><div><span =
style=3D"color:rgb(0,0,255)"><br></span></div>
<h3 =
style=3D"padding:0px;margin:0px;white-space:nowrap;font-family:arial,sans-=
serif"><a rel=3D"nofollow" =
href=3D"https://www.facebook.com/newallianceeast" target=3D"_blank"><span =
style=3D"font-size:13px">New Alliance East</span><span =
style=3D"font-weight:normal;font-size:13px">&nbsp;-&nbsp;</span><span =
style=3D"font-weight:normal;font-size:small;font-family:arial,sans-serif">=
Facebook</span></a></h3>
<h3 =
style=3D"font-weight:normal;padding:0px;margin:0px;white-space:nowrap;colo=
r:rgb(34,34,34);font-size:16px;font-family:arial,sans-serif"><br></h3><h3 =
style=3D"font-weight:normal;padding:0px;margin:0px;white-space:nowrap;colo=
r:rgb(34,34,34);font-size:16px;font-family:arial,sans-serif">
<a rel=3D"nofollow" =
href=3D"http://www.google.com/url?sa=3Dt&amp;rct=3Dj&amp;q=3D&amp;esrc=3Ds=
&amp;source=3Dweb&amp;cd=3D3&amp;sqi=3D2&amp;ved=3D0CC0QFjAC&amp;url=3Dhtt=
p%3A%2F%2Fxbs111.wordpress.com%2F&amp;ei=3DrNMqT4LLMcmEsAKtk7WwDg&amp;usg=3D=
AFQjCNHYjcyJYRf58A81_tpPpaKYjc2PAw&amp;sig2=3D1gIhPv8oUH76FChuLviaGg" =
style=3D"color:rgb(221,75,57)" target=3D"_blank">X :::: B :::: =
S</a></h3>
</div><div =
style=3D"font-style:normal;font-size:14px;background-color:transparent;fon=
t-family:arial,helvetica,clean,sans-serif"><br></div><div =
style=3D"font-style:normal;font-size:15px;background-color:transparent;fon=
t-family:arial,helvetica,clean,sans-serif">
<br></div><div =
style=3D"font-family:verdana,helvetica,sans-serif;font-size:10pt"><br></di=
v>  <div =
style=3D"font-family:verdana,helvetica,sans-serif;font-size:10pt"> <div =
style=3D"font-family:'times new roman','new =
york',times,serif;font-size:12pt">
 <div dir=3D"ltr"> <hr size=3D"1">  <font face=3D"Arial"> <b><span =
style=3D"font-weight:bold">From:</span></b> Grant Headquarters &lt;<a =
href=3D"javascript:_e({},%20'cvml',%20'jggrant@melbpc.org.au');" =
target=3D"_blank">jggrant@melbpc.org.au</a>&gt;<br>
 <b><span style=3D"font-weight:bold">To:</span></b> <a =
href=3D"javascript:_e({},%20'cvml',%20'analogue@hyperreal.org');" =
target=3D"_blank">analogue@hyperreal.org</a> <br> <b><span =
style=3D"font-weight:bold">Sent:</span></b> Monday, May 20, 2013 8:46 =
AM<br>
 <b><span style=3D"font-weight:bold">Subject:</span></b> [AH] Korg DSM-1 =
16 analog voices and 16 outs wow!!!!<br> </font> </div> <div><br><div>
 =20

   =20
 =20
  <div>
    <br>
    If you thought you could have, for example, kick on 1 output, snare
    on another, etc.,&nbsp; you'll be sadly disappointed.&nbsp;&nbsp; =
Unfortunately,
    there's no way to properly assign voices.&nbsp; Individual voices =
cycle
    through the multiple outputs, making them, in effect, =
useless.&nbsp;&nbsp; You
    can really only use it with the main (mono) output.&nbsp;&nbsp; <br>
    <br>
    [Well, Korg hadn't had a lot of experience with =
samplers.&nbsp;&nbsp; One of
    the things people said about the earlier DSS-1 was "it would be cool
    with multiple outputs".&nbsp; So they did it ....!]<br>
    <br>
    <br>
    jg::<br>
    <br>
    <br>
    <font face=3D"Arial">&gt; Hi I have a few questions on<br>
      &nbsp;Korg DSM-1 rackmount sampler ---16 analog voices and 16 =
outs</font><br>
  </div>

</div><br><br></div> </div> </div>  </div></div></blockquote></div>
=
</blockquote></div><br></div></div></blockquote></div><br></div></div></bo=
dy></html>=

--Apple-Mail=_1C660453-EC7C-489D-8F7A-ED7520FFF313--